Mauser Central Forum Index
Welcome ! We hope you will take the time to Register at Mauser Central. Registering is FREE, and allows you to post questions, comments and pictures on the site.  Disclaimer, This is an Informational forum intended only as an aid to help or entertain its members. All firearm repair or modifications should be done by a gunsmith. Mauser Central is in no way to be held responsible for any info you read or use here!
 
FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister   Log inLog in 

See who's chatting or Click here to join Chat.
The time now is Thu Sep 09, 2010 6:31 pm
All times are UTC - 4

 Forum index » Tech Talk : Ask The Gun Guys
Looking for a tapered boar
Moderators: Iconoclast, MTC
Post new topic   Reply to topic View previous topicView next topic
Page 1 of 1 [12 Posts]  
Author Message
444marlin
Newbie
Newbie

Joined: 08 Feb 2010
Posts: 3
Offline 		 Looking for a tapered boar
who sells one?
Looking for someone to make a tapered boar barrel? I would like it a 357.5 to 358 and tapered down to a 356 or 356.5. Just looking to increase velocities by a better seal. A twist rate of 1-14 would be helpful too.

PostPosted: Mon Feb 08, 2010 8:07 pm
 View user's profile Send private message Send e-mail
 Back to top 
kudzu
New Member
New Member

Joined: 17 Aug 2008
Posts: 84
Offline 		What is a tapered boar?

PostPosted: Mon Feb 08, 2010 10:38 pm
 View user's profile Send private message Send e-mail
 Back to top 
BobVZ
Senior Member
Senior Member

Joined: 06 Nov 2007
Posts: 660
Offline
kudzu wrote:
What is a tapered boar?


One w/narrow hips like this:

PostPosted: Mon Feb 08, 2010 10:52 pm
 View user's profile Send private message Send e-mail
 Back to top 
GunBum
Advanced Member
Advanced Member

Joined: 06 Dec 2009
Posts: 253
Location: The danged desert in Utah
Offline
kudzu wrote:
What is a tapered boar?


A pig that's fat on one end and skinny on the other.

PostPosted: Mon Feb 08, 2010 10:53 pm
 View user's profile Send private message Send e-mail
 Back to top 
ireman412
Newbie
Newbie

Joined: 07 Feb 2010
Posts: 22
Location: Port St. Lucie, Florida
Offline 		That really made me laugh out loud. You guys are nuts.

PostPosted: Mon Feb 08, 2010 11:00 pm
 View user's profile Send private message Send e-mail
 Back to top 
53Fr8
New Member
New Member

Joined: 28 Jan 2010
Posts: 97
Location: San Francisco
Offline 		Didnt even give the new guy a chance... You guys show no mercy.Good shot..LOL...

PostPosted: Mon Feb 08, 2010 11:07 pm
 View user's profile Send private message Send e-mail
 Back to top 
Clemson
Senior Member
Senior Member

Joined: 13 Apr 2005
Posts: 795
Location: Upstate, SC
Offline 		444, I don't know of anyone making tapered bore barrels for general sale, but you could make your own by lapping a barrel in only one direction. I have no earthly idea how much work that would be, but I feel confident that it could be done.

Clemson
_________________
Veteran, U.S. Army
NRA Life Member,NRA Certified Instructor
Owner, Bolt&Barrel Gunsmithing, Greenwood, SC
www.boltandbarrel.com

PostPosted: Mon Feb 08, 2010 11:30 pm
 View user's profile Send private message Send e-mail
 Back to top 
kudzu
New Member
New Member

Joined: 17 Aug 2008
Posts: 84
Offline 		And we wont even mention the word "well"

PostPosted: Mon Feb 08, 2010 11:48 pm
 View user's profile Send private message Send e-mail
 Back to top 
ikesdad
Advanced Member
Advanced Member

Joined: 16 Mar 2007
Posts: 232
Location: Colorado
Offline 		Welcome aboard.

But I have to admit, that was funny. What a bunch of azzes we are.

PostPosted: Tue Feb 09, 2010 1:03 am
 View user's profile Send private message Send e-mail
 Back to top 
MIKE WISKEY
Respected Member
Respected Member

Joined: 29 Oct 2006
Posts: 1240
Offline 		444 welcome aboard, some custom barrel makers do tapered bores, try pac/nor or kreiger to start.

PostPosted: Tue Feb 09, 2010 11:54 am
 View user's profile Send private message Send e-mail
 Back to top 
TooManyMausers
Newbie
Newbie

Joined: 23 Mar 2009
Posts: 20
Location: Parker, CO
Offline 		I was thinking it, sorry

PostPosted: Tue Feb 09, 2010 1:16 pm
 View user's profile Send private message Send e-mail
 Back to top 
444marlin
Newbie
Newbie

Joined: 08 Feb 2010
Posts: 3
Offline 		Thanks for the info
I do apologize
I did not specify that it is needed in a 8 inch here. I have been posting everywhere and got in a rush.
What myself and others are looking to a performance upgrade for our Dan Wesson revolvers. As we grow weary of FA in the top placing. I got the job of gun forums, and superdan got the job of contacting manufactures, and 788 will make them.
We have a need for a tapered and 1-14 twist barrel for one tester, and also looking for a 26 in 357 dia. with the 1 in 14 twist to cut up for 3 test guns.

I talked to superdan last night and was told walther, kieger and others only offer a 355 dia. I will tell him about the pac/nor. We are looking for very high quality, as these barrels are going to be strapping some very hot loads for the model 15-2 357 magnum and the model 40 and 740 357 maximum for IHMSA competitions.

CZ will not help us develop one, so the forum will.

I will check back here soon, or I can be found on the DW forum as maximumload. I will stay on here after our little quest, as I do have some mausers nothing to exciting as the both are Turks.
And thank you for your input on the lapping and pac/nor.

P.S. Sorry about the boar thing, just in to much of a hurry and spring is coming, and they to be ready by then, If they work out as planned.

PostPosted: Tue Feb 09, 2010 4:10 pm
 View user's profile Send private message Send e-mail
 Back to top 
Display posts from previous:   Sort by:   
Page 1 of 1 [12 Posts]  
Post new topic   Reply to topic View previous topicView next topic
 Forum index » Tech Talk : Ask The Gun Guys
Jump to:  


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum





Your Source for How-To Gunsmithing Videos
Lothar Walther

By viewing this page you agree to all terms in our Waiver !


Powered by phpBB © 2001, 2005 phpBB Group

[ Time: 0.1979s ][ Queries: 9 (0.0561s) ][ GZIP on - Debug on ]