<--Back to page 33 | pg 34 | Next to page 35-- >

Jason S. say's-This is a Turkish M98 Mauser in 243. It has a 22" remington barrel, bold trigger with side safety, richards black laminate monte carlo stock, and a sims buttpad. The steel is media blasted and coated with 3 coats of clear, the stock is finished in a clear satin. Pictures dont do it justice, but I aint goin to let you hold it!!

Here's my Dad's .270win built on a VZ24 receiver , the metal is Black Oxide finished , it has a Dakota Will Laminate stock finished with a walnut stain , barrel is a free floated E.R Shaw #1 1/2 contour and 24'' with muzzle break it measures 26'' , Redfield rings and one piece scope rail , BSA Contender 4x16x40 scope, uncle mike stud's and qd swivels and allen basket weave leather sling, Timney low scope safety and Timney sportsman trigger at 2 3/4 lbs. The Stripper clip/charging hump was removed, trigger guard bow was thinned, receiver face and inner barrel seat was trued/recut, bolt face and lugs were lapped . Action Machining work done by Fred at Lowtech, Barrel and metal Finish was done by E.R Shaw. Dad did the rest.

<--Back to page 33 | pg 34 | Next to page 35-- >